08 flhtc police kick stand safty

[trobbins]

i need to bypass this saft switch anyone ben there done that thanks ted

[BigWorm]

never done it , but if its like any other 2 wire switch like on older jap bikes, you just cut the wires and connect them together eliminating the switch. you got pictures of said switch

[MrMarty51]

Or make up a pigtail jumper to go from one wire terminal to the other then heatshrink around them to keep out the kruddiez.

[trobbins]

yah its a 3 wire and it has a angle sensor in weird shit

[BigWorm]

don't know ted, i'd need a schematic to see what to do.

[trobbins]

yah im getting a book in asap thanks for the help

[Crocodile56]

Simple Ted, take an OHM meter and find the sw. wires, 2 will sw. 1 will be a ground. Connect the 2 wires that don't go to ground.......Well that's what it should be.

[trobbins]

ill try that tonight thanks croc the gaskets will be on the way

[MrMarty51]

That third wire might be to a controller in the computer,Be carefull,be very carefull.

[BigWorm]

yep, if all else fails get the directions........................

[MrMarty51]

Do a google search and see what You can come up with.

[trobbins]

left it alone